Last, a Tile C1 pelvic finite element model was simulated and fixed with either semi- or a full-length anterior supra-acetabular external fixator. A 500 N loading was tested on the model with three directions (cranial-caudal, anterior-posterior and lateral-medial) and the stiffness was determined by the max displacements.
The anatomical reduced Tile C1.3a 2 pelvis and a single virtual supra-acetabular screw external fixator. Tile C1.3a 2: the rotationally and vertically unstable, associated with pubic symphysis separation and trans-sacral foramen fracture (black arrow). The length of the construct moment arm is 60 mm
C1 adhesives are basic cement based adhesives and not stocked by Tile Fix Direct. As these adhesives are generally not suitable for Porcelain tiles, the most common type of floor tile.
The main difference is to measure the bond strength index, C1 bond strength is greater than or equal to 0.5Mpa, and C2 bond strength is greater than or equal to 1.0Mpa. Generally, small brick with C1-type tile adhesive, stickers more than 800x800 tiles with C2-type tile adhesive. You must log in or register to reply here.
The Il ew European standard EN 12004 has created two main classesfor ccmcntitious tile adhcsiucs:C1 millC2. C1 reprceents thestnndard tileadhcsiocs, tolicrcas C2 defines tilemibcsiucs toitlt illcreased requirements for tensile adhesion strength. The ieusi!e adhesion strellgtlt is determined according to EN 1348.
The Miele Compact C1 Pure Suction Canister hard floor vacuum is a wonderful vacuum for your hard surface and tile floors. In our search to find better and better hard flooring vacuums with high performance, we run in to many that don't measure up. But the Miele Compact C1 hard floor vacuum is a great little workhorse that we think you will enjoy if you have a house with more hard floors and tile floors than carpet.
The adhesion test (C) is the most difficult to pass because the adhesive is put through a series of tests, freeze/thaw cycles, water immersion etc and then the bond strengths are measured after 28 days. C1 is greater than 0.5 N/mm2 after all the different cycles and C2 is greater than 1 N/mm2.
The C1 and C2 ratings (speciﬁ ed in DIN EN 12 004) relate to tensile adhesion performance. The Class C1 criteria represent the minimum requirements (min. 0.5 N/mm²) for all cementitious tile adhesives.
C1 & C2 are based on Tensile Adhesion Bond Strength. This . Tensile Adhesion Bond Test. quantifies the amount of vertical force required to pull a tile or stone from a given substrate after a prescribed period of time. This test can be performed both in the lab environment and also on the project site in the field.